Products > CNC Spindles

HQD GDF60-18Z/4.5 4.5kw 220V ER32 Air Cooled Spindle Motor

HQD GDF60-18Z/4.5 4.5kw 220V ER32 Air Cooled Spindle Motor

• HQD GDF60-18Z/4.5 spindle motor
• 4.5 kw air cooled spindle motor
• 220V spindle motor
• HQD spindle
• Air cooled cnc spindle motor
• CNC machine spindle motor
• CNC spindle motor
• CNC router spindle motor
INQUIRY

HQD GDF60-18Z/4.5 4.5kw 220V ER32 Air Cooled Spindle Motor

This is GDF60-18Z/4.5 air cooled spindle motor for CNC machine, 4.5 kw, 220V, 18000rpm. The spindle is manufactured by Jiangsu HQD Spindle Motor Co., Ltd.

GDF60-18Z:4.5.jpg

Specification of GDF60-18Z/4.5 spindle motor:
Brand: China HQD
Spindle power: 4.5kw
Voltage: AC 220V
Cooling method: Air cooling
Spindle rotation speed:18000 rpm
ER nut: ER32
Frequency: 300hz
Current: 15A
Bearing lubrication method: grease lubrication
High-precision angular contact ball bearing: 2×7008C P4/2×7002C P4
Rotating direction: anticlockwise from the shaft extension end
GDF60-18Z:4.5 spindle motor.jpg

Note: thread locking adhesive shall be applied or the spring washer shall be added to
prevent the looseness during the installation of the fastening screw!
hqd spindle motor.jpg

RicoCNC can offer a range CNC machine accessories, including CNC tool holder, CNC collets, CNC spanner, CNC pull stud, pull stud grippers for CNC Spindle, spindle test bar, collet nut, tool extension, lock nuts, lubrication pump and blocks, tool holder tightening fixture, linear bearings, limit switches, MPG handwheels, CNC tool setter, speed reducer, servo motor, servo driver, spindle motors, VFD inverters, controller, vacuum pump parts, etc.

Welcome to your inquiry!
HQD spindle.jpg